Brand New Design!

The blue pointer keeps track of the tides so you know the best time to head out!

A quality German tide clock movement is the heart of these funky new clocks.

Perfect for ….Surfers, Sailers, Fishermen!!

• Diameter 195mm, Width 60mm
• Clear to read analogue dial
• Shows tide cycle via a clear blue hand
• Run by 1x"AA" Battery(included)
• Single clocks can be easily wall mounted

Operating Instructions for Tide and Time Quartz

The action of the tide is very complex and involved. Many factors must be considered when  describing  the tide at any given place at a given time .The calculations necessary for compiling the official tide tables are usually done by computers. The tide clock does not claim to give the exact time of each of the tides at any given place, but it will give you the average value of the tide, which is all the average person needs to tell him when he can go boating, fishing, surfing etc.

The primary controller of the tides is the moon and the average duration between two transits of the moon around the earth is 24 hours 50 minutes and 30 seconds.This is referred to as the “Lunar” or the “Tidal” day.

This means that the tidal day –  to which the tide indicating hand of your tide clock is geared – is 50 minutes longer than the solar day of 24 hours, to which the hands of your clock are geared.Your tide clock movement has four hands  thus indicating the average  times of the tides at a given point, the hour, minute and second hands, giving you the regular time of day. To put your tide clock in operation please proceed as follows:

1.        Fitting battery:

Please insert a new 1.5 volt alkaline battery. Ensure the battery is inserted with the correct polarity to the terminals to avoid damage to the quartz crystal. The move will start to run.

2.        Setting of hands:

a)       At the back of the movement you will find the hand adjustment knob. This is for the time adjustment only.

b)       The tide hand is adjusted by rotating the white plastic wheel at the back, below the movement. The correct position can be found by using a chart of local tides in your area. A general rule is: the best time to set the tide position is at high tide during a new or full moon.

3.        Time regulation:

Your clock is set at the factory for a deviation of accuracy of approximately 1 minute per year at a room temperature of 20 degrees Celsius + or – 3 degrees. Please note that high temperature changes will also affect the accuracy. 

General Information:

The west coast of Europe and Africa, also the east coasts of Australia ,North and South America follow the ‘semi-diurnal’ pattern of two high and two low tides a day. Certain other coasts around the world such as the west coasts of Australia, North and South America are not ‘semi-diurnal” and the tide indicating part of your tide clock will be of no use to you in these areas. Please remember that any alteration of the normal time hands may affect the position of the tide hand. Therefore, after any major alteration of the setting of the time hands, the tide hand position should be checked and corrected.